1600W DEMOLITION HAMMER (INDUSTRIAL)
• CE approval
• Input power: 1600W
• Voltage: 220-230V
• Frequency: 50/60Hz
• Impact rate: 1850bmp
• Impact force: 60J
• HEX chuck system
• Net weight: 16kgs
• Plug & cable: VDE approved 4m
• Accessories contain:
1pc point chisel: 30x410mm
1pc flat chisel: 30x410mm
1 pair Carbon brush
1 bottle lubricating oil
1pc wrench
2pcs hex keys
• Packing: High-quality BMC box with wheels
| STOCK NO. | POWER | QTY./CARTON |
| 88552 | 1600W | 1 |
| 88552-BS | 1600W | 1 |
Related products
2400W 230MM ANGLE GRINDER
| STOCK NO. | POWER | QTY./CARTON |
| 79525 | 2400W | 2 |
| 79525-BS | 2400W | 2 |
1300W CIRCULAR SAW (INDUSTRIAL)
| STOCK NO. | POWER | QTY./CARTON |
| 79532 | 1300W | 4 |
| 79532-BS | 1300W | 4 |
800W JIG SAW
| STOCK NO. | POWER | QTY./CARTON |
| 79551 | 800W | 6 |
2500W 355MM CUT-OFF SAW
| STOCK NO. | POWER | QTY./CARTON |
| 79538 | 2500W | 1 |
| 79538-BS | 2500W | 1 |
BENCH GRINDER
| STOCK NO. | POWER | WHEEL SIZE | QTY./CARTON |
| 79646 | 150W | 6"/150x16x12.7mm | 1 |
| 79646-BS | 150W | 6"/150x16x12.7mm | 1 |
| 79648 | 350W | 8"/200x20x12.7mm | 1 |
| 79648-BS | 350W | 8"/200x20x12.7mm | 1 |
350W DRILL PRESS WITH CHUCK GUARD
• CE approved • Voltage: 220-30V • Frequency: 50Hz • No load speed: 620-2620/min • 5 spindle speeds • Spindle travel: 50mm • Spindle taper: B16 • With chuck guard • With micro-switch • Chuck capacity: 13mm • Electromagnetic switch • Table size: 160x160mm • Base size: 290x190mm • Max. distance from spindle end to surface of table: 220mm • Gross weight: 16kgs • Machine height: 580mm • Packing: color box
| STOCK NO. | POWER | QTY./CARTON |
| 79651 | 350W | 1 |
350W DRILL PRESS
• Voltage: 220-230V • Frequency: 50Hz • No load speed: 620-2620/min • 5 spindle speeds • Spindle travel: 50mm • Spindle taper: B16 • Chuck capacity: 13mm • Table size: 160x160mm • Base size: 290x190mm • Max. distance from spindle end to surface of table: 220mm • Gross weight: 16kgs • Machine height: 580mm • Packing: color box
| STOCK NO. | POWER | QTY./CARTON |
| 79650 | 350W | 1 |
750W DRILL PRESS (INDUSTRIAL)
• Voltage: 220-230V • Frequency: 50Hz • No load speed: 180~2770/min • 16 spindle speeds • Spindle travel: 80mm • Spindle Taper: MT2 • Chuck capacity: 16mm • Table diameter: Ø290mm • Table tilt: 45° left and right • Base size: 460x270mm • Max. distance from spindle end to surface of table: 725mm • Net weight: 55Kgs • Machine height: 1580mm • Packing: carton box
| STOCK NO. | POWER | QTY./CARTON |
| 79654 | 750W | 1 |