EXHAUST FAN
• CE approved
• Voltage: 220-240V
• Frequency: 50/60Hz
• Noise: 40dB
• Material: PP+AS, 100% new material
• Installation: wall mounted
• Suitable for kitchen, toilet and bathroom
• High efficiency copper wire motor , powerful air
exhaust
• Easy installation and clean
• Switch: Pull cord
• Without plug
• Packing: color box
| STOCK NO. | SIZE | NPUT POWER |
AIR FLOW | QTY./CARTON |
| 79598 | 150mm, 6″ |
15W | 210m³/h | 20 |
| 79599 | 200mm, 8″ |
20W | 300m³/h | 14 |
Related Products
EXHAUST FAN
• CE approved
• Voltage: 220-240V
• Frequency: 50/60Hz
• Noise: 42dB
• Material: PP, 100% new material
• Installation: wall mounted
• Suitable for kitchen, toilet and bathroom
• High efficiency copper wire motor, powerful air
exhaust
• Easy installation and clean
• Without plug
• Packing: color box
| STOCK NO. | SIZE | NPUT POWER | AIR FLOW | QTY./CARTON |
| 79600 | 200mm, 8” | 28W | 520m³/h | 6 |
| 79601 | 250mm, 10” | 38W | 860m³/h | 6 |
| 79602 | 300mm, 12” | 48w | 1200m³/h | 5 |
SOLENOID SPRAY GUN
• CE approval
• 220-240V~, 50Hz, 110W
• Paint Reservoir: 800ml
• Max. Viscosity: 60din/sec
• Max. Flow: 300ml/min
• Nozzle: Φ0.8mm
• Cable length: 2.0m
• Accessories:
1pc viscosity measuring cup
1pc cleaning pin
2pcs valves
1pc Φ0.8mm spare nozzle
1pc wrench
• Packing: color box
| STOCK NO. | SIZE | QTY./CARTON |
| 79577 | 110W | 6 |
108PCS ROATRY TOOL SET
• CE approval
• Input power: 135W
• Rated Voltage: 230V
• Frequency:50/60Hz
• No load speed: 10000-32000rpm
• Accessories:
10pcs grinding stones
2pcs Diamond bits
1pc mandrel for sanding bands
1pc mandrel for cut-off wheels
1pc mandrel for felt wheels
36pcs cut-off wheels
4pcs felt wheels
4pcs sanding bands
2pcs drill bits
2pcs collets
1pc Whet stone
40pcs sanding discs
1pc flexible shaft
• Packing: blow mould case
| STOCK NO. | SIZE | QTY./CARTON |
| 79555 | 135W | 6 |
| 79555-BS | 135W | 6 |
ANGLE GRINDER
•CE approval
•Input power: 2350W
•Voltage: 230V
•Frequency: 50Hz
•No load speed: 6000r/min
•Disc diameter:230mm
•Self-lock-preventing switch
•Soft starter
•Plug & cable: CE approved 2m
•Accessories contain:
•1 pair Carbon brush
•1pc side handle
•1pc wrench
•1pc hex key 6mm
•Packing: color box
| STOCK NO. | SIZE | QTY./CARTON |
| 79524 | 2350W | 1 |
DRILL PRESS
• Input power: 750W • Voltage: 230V • Frequency: 50Hz • No load speed: 180~2770RPM • 16 spindle speeds • Spindle travel: 80mm • Spindle Taper: MT2 • Chuck capacity: 16mm • Table diameter: Ø290mm • Table tilt: 45° left and right • Base size: 460x270mm • Max. distance from spindle end to surface of table: 725mm • Net weight:55Kgs • Machine height:1580mm • Packing: carton box
| STOCK NO. | SIZE |
| 79654 | 750W |
DRILL PRESS
• Input power: 350W • Voltage: 230V • Frequency: 50Hz • No load speed: 620-2620RPM • 5 spindle speeds • Spindle travel: 50mm • Spindle taper: B16 • Chuck capacity: 13mm • Table size: 160x160mm • Base size: 290x190mm • Max. distance from spindle end to surface of table: 220mm • Gross weight: 16kgs • Machine height: 580mm
| STOCK NO. | SIZE |
| 79650 | 350W |
