DRILL STAND
• For use with drills
• Sturdy base with slots for fitting machine vice
• Suitable for TOLSEN hammer drill 79501/79501A/79502/
79502A/79503/79503A/79505/79505A/79506/7950
6A/79505-BS/79505A-BS/79506-BS/79506A-BS
• Column height: 510mm
• Column diameter: 25mm
• Depth of feed: 60mm
• Collar diameter: 43mm and 38mm
• Base size: 22x16cm
• Net weight: 3kg
• Aluminum die casting body
• Packing: color box
| STOCK NO. | SIZE | QTY./CARTON |
| 10500 | 38-43mm | 4 |
Related Products
EXHAUST FAN
• CE approved
• Voltage: 220-240V
• Frequency: 50/60Hz
• Noise: 40dB
• Material: PP+AS, 100% new material
• Installation: wall mounted
• Suitable for kitchen, toilet and bathroom
• High efficiency copper wire motor , powerful air
exhaust
• Easy installation and clean
• Switch: Pull cord
• Without plug
• Packing: color box
| STOCK NO. | SIZE | NPUT POWER | AIR FLOW | QTY./CARTON |
| 79598 | 150mm, 6" | 15W | 210m³/h | 20 |
| 79599 | 200mm, 8" | 20W | 300m³/h | 14 |
HVLP FLOOR BASED SPRAY GUN
• CE approval
• 220-240V~, 50Hz, 650W
• Paint Reservior: 800ml
• Max. Flow: 800ml/min
• Max. Viscosity: 60din/sec
• Nozzle: Φ1.8/2.6mm
• Cable length: 2.0m
• Accessories:
1pc viscosity measuring cup
1pc 2.6mm nozzle
1pc shoulder belt
1pc cleaning pin
• Packing: color box
| STOCK NO. | SIZE | QTY./CARTON |
| 79579 | 650W | 4 |
108PCS ROATRY TOOL SET
• CE approval
• Input power: 135W
• Rated Voltage: 230V
• Frequency:50/60Hz
• No load speed: 10000-32000rpm
• Accessories:
10pcs grinding stones
2pcs Diamond bits
1pc mandrel for sanding bands
1pc mandrel for cut-off wheels
1pc mandrel for felt wheels
36pcs cut-off wheels
4pcs felt wheels
4pcs sanding bands
2pcs drill bits
2pcs collets
1pc Whet stone
40pcs sanding discs
1pc flexible shaft
• Packing: blow mould case
| STOCK NO. | SIZE | QTY./CARTON |
| 79555 | 135W | 6 |
| 79555-BS | 135W | 6 |
ANGLE GRINDER
•CE approval
•Same quality as Dewalt
•Input power: 2400W
•Voltage: 230V
•Frequency: 50Hz
•No load speed: 6000r/min
•Disc diameter:230mm
•Self-lock-preventing switch
•Soft starter
•Plug & cable: CE approved 2m
•Accessories contain:
•1 pair Carbon brush
•1pc side handle
•1pc wrench
•1pc hex key 6mm
•Packing: color box
| STOCK NO. | SIZE | QTY./CARTON |
| 79525 | 2400W/230mm | 2 |
DRILL PRESS
• Input power: 550W • Voltage: 230V • Frequency: 50Hz • No load speed: 180~2770RPM • 16 spindle speeds • Spindle travel: 80mm • Spindle Taper: MT2 • Chuck capacity: 16mm • Table diameter: Ø290mm • Table tilt: 45° left and right • Base size: 420x250mm • Max. distance from spindle end to surface of table: 450mm • Net weight:38Kgs • Machine height:980mm • Packing: carton box
| STOCK NO. | SIZE | QTY./CARTON |
| 79652 | 550W | 1 |
DRILL PRESS
• CE approval • Input power: 350W • Voltage: 230V • Frequency: 50Hz • No load speed: 620-2620RPM • 5 spindle speeds • Spindle travel: 50mm • Spindle taper: B16 • With chuck guard • With micro-switch • Chuck capacity: 13mm • Electromagnetic switch • Table size: 160x160mm • Base size: 290x190mm • Max. distance from spindle end to surface of table: 220mm • Gross weight: 16kgs • Machine height: 580mm
| STOCK NO. | SIZE |
| 79651 | 350W |
